C O A N D A S O L I D F U E L H O O D S
PRODUCT INFORMATION
​
The Coanda Solid fuel hood was designed to deal with the specific requirements of wood and charcoal burning equipment.
​
It was based around solving a number of issues that our customers had been experiencing, including:
-
The need for reduced duct temperatures
​
-
Improved capture of high heat, smoke and grease exhaust
​
-
For island hoods in particular the aesthetic requirement of no visible drain, pipes or nozzles
​
-
The need to prevent breech of smoke and fumes into the kitchen, even with low air volumes – Important for OH&S and staff comfort
​
-
The need for increased fire protection – important for safety, our unique coil pack filters are UL1046 accredited
​
-
The need for clean air discharge – Important for public space discharge, our coil pack filters are UDI2052 accredited
​
-
The need for Untempered M/U air – Important as it significantly reduces operational costs and uniquely possible with Coanda technology as the Chef is not in the Makeup airstream
​
-
The need for simple filter cleaning and reduced duct maintenance – Important as it significantly reduces cleaning costs and the potential of fire, possible as our filters capture up to 95% of particles down to 8 micron in size
​
-
Coanda Hoods are designed for simplicity and made from high quality materials. Their sleek geometry and material combinations, create a modern, personalised look.
ADVANTAGES and how we achieved it with the Incorporation of the unique Coanda Fogging system
-
As the Coanda fogger is located inside the KEX plenum it does not require drainage
​
-
The Coanda fogger uses much smaller water particulate for faster cooling of the plenum, increased fire suppression and reduction of smoke and particulate odour and visibility
​
-
Custom solutions available
​
-
Unsurpassed capture rates
​
-
Easy to clean
​
-
Reduced duct maintenance​
​
CONSTRUCTION
​​
-
Coanda hoods are manufactured from ASI304 1.2mm no 4 finish S/S
​
-
Unique Coanda “Curve” M/U air plenum
​
-
Led strip lighting
​
-
Front cup coil pack filters
​
-
Removable louvred makeup air deflectors
​
-
The Fogging system supply tubes and nozzles are installed inside the KEX plenum
​
-
The fogger control is all neatly incorporated in a standard externally mounted lockable S/S control box
​
-
The fogging system requires a ½ “ BSB filtered water supply and a standard 10 amp power supply and no drain, that’s it
​
-
The fogging system is simple to maintain, just change the water filter as required
​​
​CERTIFICATION
​​​
Coanda Hoods are certified by an independent specialist engineering firm providing certainty of performance.
​
​To meet code requirements, the kitchen room still requires an air change of 5L/s/sqm. An exhaust port with 100Pa external static allows the discharge to provide this exhaust or it can be separate.
​
Designed to deal with the specific requirements of wood and charcoal burning equipment
Coanda Solid fuel hood at Yakimono Melbourne. Coanda Fogger control box.
Coanda Solid fuel hood at Seta Sydney. Coanda Fogger supply tune and nozzles.
Coanda Solid fuel hood at Society.
